pic: Fun Bevel Gearbox Idea

[Bryce2471]

Originally Posted by sanddrag

Can you comment on what exact gears you would use if you were to make this?

I cant say for sure, I already had the CAD for these bevel gears sitting around in my computer. Although, I think the model originally cam from a QTC online catalog, so you could probably buy them there.

[JustPlyZ]

Originally Posted by Chadfrom308

We had 4 CIMs/4 Mini-CIMs on our drivetrain and didn't ever pop the breaker. That being said, we got a little lucky

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker.

[R.C.]

Originally Posted by JustPlyZ

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker.

That's not the same as all motors in drive...

[Chadfrom308]

Originally Posted by JustPlyZ

We've had 6 CIMs/ and 2 mini CIMs,
4 of the CIMs were powering our drive and 2 CIMs + 2 minis were powering out shooter, we have yet to pop a breaker.

We also had 2 CIMs on our thrower

[Bryce2471]

Originally Posted by Chadfrom308

We also had 2 CIMs on our thrower

Wow! that's a lot of CIMs.

I just realized that over 25 lbs of you robot was made up of CIM motors.
At least 21% of you robots mass was CIM motors.