pic: Good use of a old cRio

[Ben Wolsieffer]

Originally Posted by orangemoore

I don't have acess to a 4-slot crio but the current 2015 driver station should work with 4-slot cRIOs.

For the 2015 driver station to work, go to the 3rd tab on the left (the gear), and change the FMS protocol from '15 to 09' to '14

You should then be able to connect to the 4 slot cRIO.

I hope this helps.

Despite that misleading switch, you are actually unable to use the new DS with the to control cRIOs running old code. See this thread for more information.

I believe it is possible to install this year's labview code on to the cRIO and allow it to use the 2015 protocol, but this doesn't work for other languages.