|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: S'no problem
Hey we have problems down here too. The massive Florida humidity causes our drill bits to rust out within a single season, and it wreaks havoc with PLA and nylon filament. The extruder on our printer practically steams with all the absorbed moisture.
![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|