pic: Compressor Backpack

[bEdhEd]

Originally Posted by Sam_Mills

Don't even get me started about this...

How do you mean?

[Sam_Mills]

Originally Posted by bEdhEd

How do you mean?

I have been lucky enough to not have to deal with it, but I have friends on other teams who have come into issues regarding the rules about air coming from one compressor, having other compressors in the venue, and LRIs making up their own opinions about rule intent.

sorry to derail

[rich2202]

Originally Posted by Sam_Mills

LRIs making up their own opinions about rule intent.

Use the Q&A to get a ruling you can print and bring to the event.

[Jacob Bendicksen]

Regardless of legality, this thing is just cool.

[bEdhEd]

I think we may be able to get away with this at some events IF we only use it to compress when testing systems in the pit and practice field. This could actually be useful for the practice field, due to the limited time.

But we have to remember that we need to compress with our single on board compressor before an official MATCH to make sure the matches themselves are all done by the book.

[ATannahill]

This might help you.

If you have a large air tank off the robot and use the robot compressor to fill it the morning of the competition, you could then use air from this tank to pre-fill your onboard tanks before each match. This would still meet the requirement that all air comes from the one compressor and allow you to hit a higher psi before starting your compressor to finish filling the tanks.

I do not believe there is a rule stating that air cannot be temporarily stored off the robot.

[rich2202]

Originally Posted by rtfgnow

If you have a large air tank off the robot and use the robot compressor to fill it

R78 Any pressure vent plug must be:
A. connected to the pneumatic circuit such that, when manually operated, it will vent to the atmosphere to relieve all stored pressure in a reasonable amount of time, and ...

ONE Vent Plug venting ALL stored pressure, even off board pressure.

Now, if you use Quantum Entanglement to activate a vent on the off board tank, I wonder if that would violate the no other wireless communication rule.

[Richard Wallace]

Originally Posted by rtfgnow

I do not believe there is a rule stating that air cannot be temporarily stored off the robot.

R74 and R75 provide (only) two methods of using an off board compressor, illustrated in Fig. 4-8 and Fig. 4-9. Neither of these permissible methods includes off board air storage.

[Jon Stratis]

Originally Posted by rtfgnow

This might help you.

If you have a large air tank off the robot and use the robot compressor to fill it the morning of the competition, you could then use air from this tank to pre-fill your onboard tanks before each match. This would still meet the requirement that all air comes from the one compressor and allow you to hit a higher psi before starting your compressor to finish filling the tanks.

I do not believe there is a rule stating that air cannot be temporarily stored off the robot.

R70:

“Stored” air pressure on the ROBOT must be no greater than 120 psi. No stored air pressure intended for the ROBOT may be located off-board the ROBOT.

Emphasis mine.

Honestly, this backpack scares me from a safety perspective. What happens to the unlucky person wearing it if a tank should explode? As an LRI, I would insist it be removed from the venue, and I bet the UL Safety advisors would agree.

[JamesCH95]

Originally Posted by Jon Stratis

R70:

Emphasis mine.

Honestly, this backpack scares me from a safety perspective. What happens to the unlucky person wearing it if a tank should explode? As an LRI, I would insist it be removed from the venue, and I bet the UL Safety advisors would agree.

This. This times all of it. As a participant at an event I would want that removed. Plastic air tanks scare the bejesus out of me, mostly because I know first-hand how much energy and how much shrapnel they make.

If the pack got dropped while it was pressurized really bad things could happen. Please do not use this device, ever. I know it seems cool, but it's just asking for a disaster.

[evanperryg]

It's really, really cool in concept. Pretty much anything turned into a backpack is pretty awesome, and you've obviously made something that serves a very good purpose. I agree, though, about the safety problem. Nobody can stop you from using it in your shop, but i'd suggest using metal air tanks for something like this.

[Rosiebotboss]

I agree with Jon.

At LRI training at HQ in early Jan, one of our fellow CMP LRI who works at an Army Testing Lab hired an intern to test the most common plastic tanks available to FIRST teams. The results for the black Clippard tanks was good. The white Clippard tanks (See the Manual for the exact p/n) were ruled illegal after several failures during the season and the resultant testing this summer at the Army Lab. And if I remember right, the performance deteriorated when damaged, nicked or abused, even slightly.

Kudos for thinking outside the box, but you won't see one being used on my team or at my event. Period. End of story.

[Nyle]

Not all white plastic air tanks are the clippard ones
If I'm not mistaken, the air tanks in the picture are, in fact, from pneuaire, not clippard. Not that that makes it a good idea.

[Dale]

(deleted)

[SoMe_DuDe904]

Originally Posted by Jon Stratis

R70:

Emphasis mine.

Honestly, this backpack scares me from a safety perspective. What happens to the unlucky person wearing it if a tank should explode? As an LRI, I would insist it be removed from the venue, and I bet the UL Safety advisors would agree.

You beat me to it Jon. Those white tanks fail regularly if even slightly nicked or damaged. I saw one go off last year on the field and it sounded like a grenade going off. The plastic shards from an exploded tank would be a hazard not only to the wearer but those around him.

That looks super dangerous.