pic: Custom Bumper Numbers

[Robopromo]

loading photo ...

[billbo911]

Just keep in mind the minimum stroke requirement of .5".

R28 Team numbers must be displayed and positioned on the BUMPERS such that an observer walking
around the perimeter of the ROBOT can unambiguously tell the Team’s number from any point of
view and meet the following additional criteria:
A. consist of numerals at least 4 in. high, at least ½ in. in stroke width, and be either white in
color or outlined in white

A couple of the example images appear to not meet that requirement. The sad thing is, they are the fonts that best match the theme of Stronghold!

[Certified Nerd]

Originally Posted by billbo911

Just keep in mind the minimum stroke requirement of .5".



A couple of the example images appear to not meet that requirement. The sad thing is, they are the fonts that best match the theme of Stronghold!

Yea, that is a bummer.

[Robopromo]

Originally Posted by billbo911

Just keep in mind the minimum stroke requirement of .5".



A couple of the example images appear to not meet that requirement. The sad thing is, they are the fonts that best match the theme of Stronghold!

Don't hesitate to use our "Medieval" font for your bumpers if you like it. The stroke length is 1/2" at the most narrow portion of the digits and up to around an inch at the thickest.

The "Dungeon" font is not recommended for bumpers because of some of the more narrow parts, it but makes a good font for team standards.

[Bob Steele]

On your site when it says 1 set does that mean 4 of the team numbers? One for each of the sides? I think it does but I am just asking so I can place an order.... thanks

[Robopromo]

Originally Posted by Bob Steele

On your site when it says 1 set does that mean 4 of the team numbers? One for each of the sides? I think it does but I am just asking so I can place an order.... thanks

One set is four digits (one full team number). So one set covers one side.