|
|
|
 This [Coach badge] means no-touchy the controllers. Even to save them from certain doom. - Kevin Sevcik [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| This [Coach badge] means no-touchy the controllers. Even to save them from certain doom. - Kevin Sevcik [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
02-02-2016, 01:20 PM
|
|||
|
|||
|
Re: pic: Group 1 Design
That's an awesome CAD design
 Just a quick question: your shooter seems to be using CIM Motors to drive the ball out. Our team tried using CIM motors for the shooter with 4 in wheels but did not get great results in term of distance traveled by the ball. Did your team test the shooting mecanism with the CIM motors? If so, did the ball travel far? 
|
|
#3
02-02-2016, 01:47 PM
|
||||
|
||||
|
Re: pic: Group 1 Design
Really neat and clean design.
One question: Bumpers- How are you mounting them?
|
|
#4
02-02-2016, 03:39 PM
|
|||
|
|||
|
Re: pic: Group 1 Design
I really like your design, but how are you planning on moving your mechanism with the window motor? How high does it go? What are you planning to use it for?
|
|
#5
02-02-2016, 03:46 PM
|
||||
|
||||
|
Re: pic: Group 1 Design
Looks pretty sweet! But, like a couple others are asking: are bumpers going to be a problem?
|
|
#6
02-02-2016, 04:00 PM
|
||||
|
||||
|
Re: pic: Group 1 Design
So...This isn't our actual design. This was one of three designs that we presented to our community at the end of week 1. The community felt that we were sacrificing too much and dedicating ourselves to shooting with this design and sort of rejected it.
As for the shooter, we are currently using 2 mini - cims and plan on shooting from a dedicated spot on the field. Testing using our prototype has been relatively reliable. We are also now focused on scoring in the low goal. For that our prototype works really well. Edoga
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
