|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: pic: Robot Droppings from 2016 Sacramento Regional
There was a driver's station in Australia for at least an hour and a half waiting for a team to pick it up.
Can we bid on any of that stuff. I will take all the hex bearings. $2.00 AUD. |
|
#2
|
||||
|
||||
|
Re: pic: Robot Droppings from 2016 Sacramento Regional
That bungee cord is mine! I lent it out to a team and never got it back. Now I know why.
|
|
#3
|
||||
|
||||
|
Re: pic: Robot Droppings from 2016 Sacramento Regional
Ouch, that's a KOP belt pulley on the left in there. Wonder how that happened?
Last edited by JesseK : 29-03-2016 at 08:52. |
|
#4
|
||||
|
||||
|
Re: pic: Robot Droppings from 2016 Sacramento Regional
Why is it that every robot parts box I ever see these days always contains one and only one 1/2 Hex bearing in it. I did not notice this was happening until this year at West Valley, but ever since then when I look into a lost parts box, there is the one 1/2 hex bearing.
I was working on the theory of the PNW FTAs/FTAAs were playing a trick on me, but here is yet another parts box with one of them in it. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|