pic: Step 1. Field Step 2. ??????? Step 3. Robot

[ForeShadow00]

Originally Posted by pilleya

For our boiler we simply measured the diameter and length the pipe from the CAD(15inches) then found the circumference, added joining holes( 5/32 rivets every 2 inches worked) and cut it out on our router. 0.118(3mmish) polycarb worked fine for us, but took a little bit of effort to hold it together while rivetting( by little bit I mean person sitting on it )

We did the same for the funnel, just measured, laid it out in 2D in SW then cut it on our router.

We are using ratcheting straps to hold the shape when we rivet tonight.

[Chief Hedgehog]

Most impressive field set up! A lot bit jealous of the build and space... great driver practice in order!

[wilsonmw04]

realizing the sightlines are going to be worse than Stronghold.

[PayneTrain]

Originally Posted by wilsonmw04

realizing the sightlines are going to be worse than Stronghold.

These WILL be the worst effective sightlines in any game in the modern era.

[ctt956]

Originally Posted by ForeShadow00

Yes and we used Masonite for the gear shoots, but we have to figure out a way to make them slicker. We might just move to plexi for those.

Maybe try wiping them down with Pledge? I've found that it leaves a slick coating on furniture. Just make sure it's dry before sliding gears on it so they don't collect any residue.

Originally Posted by PayneTrain

These WILL be the worst effective sightlines in any game in the modern era.

2018 game: Blindfolded Driving...at Night!

[Mr_I]

Originally Posted by ctt956

2018 game: Blindfolded Driving...at Night!

... with black carpet and black game pieces ...

[MARS_James]

Originally Posted by PayneTrain

These WILL be the worst effective sightlines in any game in the modern era.

At the start of a match yes, by the 3/4 point with a good alliance 2015 wins