|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Team Update 6
https://firstfrc.blob.core.windows.n...amUpdate06.pdf
Summary:
Last edited by Bkeeneykid : 27-01-2017 at 13:21. |
|
#2
|
|||
|
|||
|
Re: Team Update 6
CROCHETED VELCRO CONFIRMED LEGAL
|
|
#3
|
||||
|
||||
|
Re: Team Update 6
Another team update, another change in the definition of a rope
|
|
#4
|
||||
|
||||
|
Re: Team Update 6
Calling all grandmas! We need 3000 crocheted ropes for team's!
|
|
#5
|
||||
|
||||
|
Re: Team Update 6
We have our rope picked out.
![]() |
|
#6
|
|||
|
|||
|
Re: Team Update 6
I came up with Q82, hoping that one could defer finishing a lower numbered rotor and do most of the rotations on higher numbered rotors with non-preinstalled gears, so that when more gears arrived, you could 'finish off' more than one rotor without having to turn all of them three times. In other words, before starting #2, put gears on #3 and give it 2+ rotations, then move the gears back to #2 to give it three rotations. When the last needed gear for #3 arrives late in the match, only a 1 (or less) rotations are needed there. So much for that idea, unless you can squeeze it in the 10 second window.
What if I want to macrame a rope? http://www.redheart.com/articles/mac...erns-and-knots |
|
#7
|
|||
|
|||
|
Re: Team Update 6
To save everyone a click on what was changed on the field drawings:
They added this clamping collar and a 1/4-20 bolt to the spring. The bolt protrudes approx 1.31" into the spring and has a nylock nut (4 inch bolt and the thickness of GE-17048 is 2.69") Changes highlighted in yellow based on drawing note (Didn't save the old version to compare myself) -matto- |
|
#8
|
|||
|
|||
|
Re: Team Update 6
|
|
#9
|
||||
|
||||
|
Re: Team Update 6
Slight misinterpretation. Specifically, prior to this TU, [G15-H] included all ROPES, including team-supplied, with no guidelines around what constitutes damage instead of wear and tear.
Now we are allowed to damage our own ropes so long as the damage doesn't cause any fragment of the rope to litter the field. This is a very positive change from a referee, inspector and a team perspective. Last edited by JesseK : 27-01-2017 at 14:09. Reason: (inspectors will also love this change since they won't have to say 'yep, it was damaged LAST match') |
|
#10
|
||||
|
||||
|
Re: Team Update 6
"If a GEAR set corresponding to the next sequential unengaged ROTOR remains idle for more than ten (10) seconds, the rotation count resets to zero (0)."
Does this pretty much mean you have to go in order now? Can't see why you would go out of order anyways but I think this pretty much says go in order it you have to start over. |
|
#11
|
|||||
|
|||||
|
Re: Team Update 6
Hooray! It also wastes the time of the thousands of people who read all of the answers as they are posted.
![]() Last edited by GeeTwo : 27-01-2017 at 14:04. Reason: Deleted duplicate comment of post #9 |
|
#12
|
||||
|
||||
|
Re: Team Update 6
Quote:
|
|
#13
|
||||
|
||||
|
Re: Team Update 6
|
|
#14
|
||||
|
||||
|
Re: Team Update 6
Quote:
|
|
#15
|
||||
|
||||
|
Re: Team Update 6
Yes. It would be nice if people remembered to quote the rules when they make definitive statements about those rules.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|