pic: Crab Concept 6 - Chief Delphi

14-11-2003, 22:03

Sachiel7

<Yes I managed to flip it

AKA: Shayne Helms

FRC #1132 (RAPTAR Robotics)

Join Date: Sep 2002

Rookie Year: 2002

Location: Richmond, VA

Posts: 541

Well, I tried to frame the chain gearing from this past year's bot. The idea was to have all the pieces accessible so if our crab drive got mauled we could (in between a match) convert it to something 90% similar to this past year's skid steer system. You'll notice the small sprocket on the motor going to the 45t sprocket, and the 10t to 10t from the base. The second gearing is done at the wheel assembly level. The small drive sprocket at the top axle goes to a 40t drive sprocket on the wheel.

Anyway, the design has kept with this for our emergency backup plan. It's always a good idea to have an exit...

__________________
-=Sachiel7=-

There's no such thing as being too simple!
Look for Team #1132, RAPTAR Robotics at the VCU Regional this year!

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Coaxial Lego doubble-wishbone crab	CD47-Bot	Robot Showcase	7	10-12-2003 12:10
pic: poor mans Lego Coaxial crab	CD47-Bot	Robot Showcase	8	23-10-2003 22:00
pic: Tytus Coax Crab Fender	CD47-Bot	Extra Discussion	9	28-09-2003 00:17
pic: Tytus Crab Drive lego model	CD47-Bot	Extra Discussion	11	08-09-2003 18:36
pic: 217 Gen 2 Crab Module Section view	CD47-Bot	Robot Showcase	2	28-04-2003 18:26

All times are GMT -5. The time now is 11:03.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.