|
Re: pic: Claw^2 Concept
Quote:
|
Originally Posted by Sachiel7
We're toying with several ideas.
Either aluminum extrusion that's not as curved or aluminum flat bar heat shapen. I'm leaning towards the flat bar. The bottom 2 "claws" are fixed nice and tight to the arm. The top one pivots via a piston.
|
The hardest part we found when building our arm was getting it rigid. You may want to experiment with having two support bars instead of just one pole. We found this helped with making the arm rigid 
Good luck!
__________________
2004 Arizona Regional -- Semifinalist
2003 NAT Galileo Division -- Highest Seeded Rookie (20th)
2003 NAT Galileo Division -- 100% Autonomous Completion (7 for 7)
2003 Arizona Regional -- Rookie All-Star Award
2003 Arizona Regional -- Quarterfinalist
Alumni on Team 64, The Gila Monsters
College Mentor/Founder of Team 1011, CRUSH
|
I hope that 50 years from now, FIRST is no longer required. - Lil' Lavery [more] 
06-02-2004, 01:33
Similar Threads
Threaded Mode