Beware - transmission output shaft is not 5/8"!

Andy A. · #1 19-01-2006, 20:19

Quote:

Originally Posted by sanddrag

... But let's not complain when we are getting magnificent items in the kit that teams just a few years ago could only wish for.

Back in the day, we never had beautifully machined pieces included in the kit of parts. Hexed broached gears. Cast housings. We didn't even have CIM motors.

AND we had to walk uphill both ways to get to our shops!
And we likesed it that way!

trying to keep it light hearted,
-Andy A.

Nitroxextreme · #2 19-01-2006, 21:27

someone should make this a sticky at least for years with the transmission....it will save a lot of people time and anguish

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
diameter of transmission output shaft	sj31419	Electrical	5	17-02-2005 22:09
supplier for 5/8" shaft	david.clark	Kit & Additional Hardware	2	17-01-2004 18:13
Cutting the output shaft	Kevin A	Technical Discussion	2	18-02-2003 01:47
Securing hex shaft to drill output	D. Gregory	Technical Discussion	6	24-01-2003 14:05