|
|
|
 It is a difficult balancing act - we're engineers because we like to solve problems, and to take a step back and let someone else solve it, with what may be a poorer solution, is darn hard.
- DonRotolo [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#19
03-04-2006, 01:07
|
|||
|
|||
|
Re: pic: Bent IFI Wheel
You must have had hit the other team pretty hard.
We forgot to use lock tight fluid on all of our wheels, so, one of our wheel side plate with the sprocket mounted on fell apart. The plate of the wheel was completely de-attached(the plate with the sprocket moves but not the wheel). No one realized it until when i tried to spin the wheel to re-align the chain. And our other three wheels had at least 2 or 3 missing screws from each plate and all the other screws were on the urge of comming off. Also, one of our sprocket was bent, so, the chain comes off and re-aligns it self after each revolution and some how it magically bent it self back to shape after 2-3 rounds. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: Jester Drive:Mecanum Wheel Drive Train | Ken Delaney 357 | Technical Discussion | 64 | 29-03-2006 22:16 |
| pic: Wheel of Doom | Paul Copioli | Robot Showcase | 24 | 03-02-2006 11:31 |
| pic: Wheel got dented during a match | davelu | Robot Showcase | 24 | 05-04-2005 23:58 |
| pic: 296's Tri-Star Wheel | CD47-Bot | Robot Showcase | 23 | 16-02-2004 11:27 |
| pic: da wheel | CD47-Bot | Robot Showcase | 11 | 08-02-2004 22:04 |
Threaded Mode