pic: FRC488 - Six Wheel Drive Chassis

Madison · #1 05-01-2007, 03:26

Quote:

Originally Posted by Andrew Blair

Madison, I know that you have no broach capability, so I'm curious- where do you buy your #25 sprockets? I can't find any finished ones online, or in the Browning catalog.

For this, we'll be ordering from McMaster-Carr -- part no. 2737T123. 5/8" bore was the smallest I found with a keyway for this particular sprocket. I didn't take a comprehensive look at many teeth counts, though, so I'm not sure how consistent the keyways are in 5/8" bore sprockets -- but I can't imagine why they all don't have one.

Andrew Blair · #2 05-01-2007, 07:23

Ah, I see. We were going to be using 1/2" bore, and for some reason, no one on earth carries broached 1/2" bore sprockets. Thanks though!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: 4 Wheel Strafing Chassis	Holtzman	Extra Discussion	9	08-07-2009 19:28
pic: Jester Drive:Mecanum Wheel Drive Train	Ken Delaney 357	Technical Discussion	64	29-03-2006 22:16
pic: Omni Wheel Drive -- Top	Richard Wallace	Extra Discussion	4	05-12-2005 18:55
pic: Chantilly Academy's 4 Wheel Drive 4 Wheel Steering!!!!	jskene	Robot Showcase	25	18-02-2005 20:24
pic: 6 wheel drive train pick	CD47-Bot	Robot Showcase	3	14-04-2004 07:10