pic: 2007 HOTBOT

[WEHickok]

QUOTE=Anubuss;582068]Definitly an great looking bot (as exspected from 67) but, call me old fashioned, but I'm missing the days of your old drive train set up, where you'd start a match on your back end, then fall forward, to me that's always been the signature of HOTBOT. Though I can understand why with the last few you've drifted away form it.

Nice job guys![/quote]

We didn't do a flopbot because we couldn't figure what do do with the flag when we flopped! Just kidding. We felt that the game this year didn't require the extra stability that the flopbot gave us. I hope we are right.

[Molten]

Looks great. Just out of curiosity, how close are you to the 72x72 limit?

[Jim Meyer]

Originally Posted by Temper Metal

Looks great. Just out of curiosity, how close are you to the 72x72 limit?

R12
Once the match has started, the ROBOT may assume a PLAYING CONFIGURATION that exceeds the size dimensions specified in Rule <R07>. While outside of its HOME ZONE, a ROBOT may expand up to a maximum width of 72 inches and depth of 72 inches. While entirely inside of its own HOME ZONE, there is no limit to the maximum width or depth of the ROBOT, as long as it remains entirely within the HOME ZONE. There are no height
limits for a ROBOT in its PLAYING CONFIGURATION at any time after the start of the match (other than those naturally created by the ceiling height of the competition venue).

We do not violate this rule, if that's what you're asking.

Yes we lift under the robots. This is something we put a lot of thought into. Our "racks" are 16" wide and 1" tall, and lift to a height 16" off the ground, which allows for robots to have up to 4" of ground clearnace. Our lifts can safely lift all our previous robots without fear of damaging them. We were originally planning to have a drive-on platform on the top of these lifts. After much consideration, we felt all-in-all this was a safer way to lift other robots. They're much less sensitive to the positioning of the robot (wheels hanging off the edge and whatnot) and it prevents robots from rolling off while being lifted. Hopefully we can work with our partners before the match to ensure we can lift them without fear of damaging their robot.