pic: 1293's drive system

[Lenyaw]

Originally Posted by team1203 4life

nice drive syestem man how did you put that together my team wants to do a tank drive if you have any hints please do tell

Here is the breakdown of our track modules.
On the front side, the sprocket was mounted to two CIMs via a banebot gearbox. On the back, the green radius was fitted into large slots & spring loaded for track tension. The 2 small square holes were fitted to our 80/20 frame, which slid all the way through to the orange plate & was held with one bolt each. Extremely robust but slightly on the heavy side at around 11 lbs each (if I remember correctly).

[VanMan]

Did it climb ramps?

[Sairamluap]

Originally Posted by Lenyaw

Here is the breakdown of our track modules.
On the front side, the sprocket was mounted to two CIMs via a banebot gearbox. On the back, the green radius was fitted into large slots & spring loaded for track tension. The 2 small square holes were fitted to our 80/20 frame, which slid all the way through to the orange plate & was held with one bolt each. Extremely robust but slightly on the heavy side at around 11 lbs each (if I remember correctly).

how pricey were they?

[peter1626]

what kind of material did you use for the treads themselves and what is the green material in the middle?

[Free Willy]

I know this is from a while ago, but are there any other pictures of this design? We would love to know more about it, especially how the inside of it worked.