|
Re: pic: Front / Rear bearing saddles rev 2
Quote:
Originally Posted by Andrew Schuetze
I am open to suggestions and we in fact are very much dependant upon a machine shop to help us with this project. I don't have any experience bending anything other than sheet metal. Does one need a hydraulic bender to make the 90 degree bends in the 5/16" aluminum?
|
Absolutely. I've never bent anything near that thick, but there's no way you're going to be able to do it with a hand break.
__________________
2001-2004: Team 100
2006-Present: Team 254
|