Quote:
Originally Posted by Arefin Bari
I can tell that there is a lot of testing going on with that elevator. 
"Then it wouldn't have survived anyways..." |
Arefin posts the inside joke, so that I have to post the story:
The HS students built a winch for the forklift out of a 6" McMaster shipping tube, wooden end caps, and two FP gearboxes. They were worried because they thought a winch made solely from plastic, cardboard, and wood would break easily. So I told them to get me a piece of rope they didn't care about. I threw it over a tie-rod bar in the ceiling, wrapped it around the winch four times and taped it to the cardboard, then clipped the FP leads to the battery (bad practice...use fuses!). The forklift was off at the time, but the whole 45 lb. chassis winched itself to the ceiling. They were like, "I can't believe you just did that. What if it broke?" And my response was, "Well, then it wouldn't have survived anyways."
__________________
MIT Mechanical Engineering
>> College Mentor,
Team 97: Cambridge Rindge and Latin School with The Edgerton Center, MIT Mechanical Engineering, Bluefin Robotics, and Draper Laboratory
>> Alumnus, Team 527: Plainedge HS
Work hard. Then work even harder.
Work until there is nothing left to work on, then work more. - RoboChair [more] 
04-02-2008, 21:36
Similar Threads
Threaded Mode