pic: "You should never go against a robotics kid"

[Andrew Schreiber]

I wouldn't tell you to sit down or shut up, clear concise communication is important and using the correct word can often make things much easier.

Though, I think your definition of a catapult is more accurately a Mangonel or an Onager. I believe the typical view of a catapult is one of those two. From some quick reading I think the main difference between the various catapults was the trajectory they launch their projectiles at. A trebuchet had a very high trajectory whereas a Mangonel had a low trajectory.

Sorry to be getting so off topic. Im a huge history nut.

[Carlee10]

I just got done with one of those....we were outside in the rain, then later snow, at midnight the night before, changing the entire throwing arm,trying to figure out how to attach the weights, and how to trigger it with a mousetrap. We had to shoot a golfball, and we had to shoot it 4 meters or more to get the full points, and we had to trigger it with a moustrap.

I like building things, but this was terrible!!!! We actually got our total grade back today, and we had a C- overall, out of the 200 points. It was 10%of our grade, too. I was kind of upset, and our technical report is actually where we lost most of our points...

Yours looks pretty good. We had to have a theme, too. Ours was "Jankapoult";we had caution tape all around it, too, partly as a joke, but partly because we really didn't know how safe it was and our teacher is 8 months pregenat!

[BlackBird11891]

My Gift to u

yes i am trying to make it

[Eugene Fang]

Originally Posted by BlackBird11891

My Gift to u

yes i am trying to make it

Nice work on the CAD so far.

Just FYI, the vertical posts that are in the actual picture but not in the CAD is a safety feature added later in the design process. After the arm is pulled back, a bar goes through the two holes in the two upright bars. This is so that so while someone is hooking up the quick release, if the people holding the arm back accidentally let go, it won't do a full swing.

[samir13k]

...3 kids from 1501 (non-school sponsored team) were finally allowed to be in a group together in our schools engineering class. It was the first time the teacher let us choose our own groups. It was 1 mechanical, 1 electrical (me), and 1 design student. The task was to demonstrate a usage of pneumatics. We could recreate something using paper, or any other building material. So while most kids used the manual valves, Our group was the first in the classes history to actually use the solenoids in the kit. We did not have a programmer, but i managed to figure it out in a couple of minutes...
Anyways, while most people made something simple like the outriggers on a bulldozer, our group made a pneumatic claw! It was massive compared to all the other projects, used more solenoids than our last 3 bots combined...and used 2 controllers because the schools could only handle 4 motors/solenoids a piece. It could pinch. move outward/inward, and tilt up and down. I will try to remember to snap a pic of it tomorrow... If you can see it lol, its made out of awesome clear plexiglass

[dtengineering]

Technically the lack of a counterweight does not disqualify this as being a trebuchet... rather it puts it in to the category of the traction trebuchet. http://members.iinet.net.au/~rmine/htt/htt02.html

Jason