pic: Robot Bumpers

[jgraber]

Originally Posted by dlavery

and submit a particular, specific question to the FRC Q&A forums. Get your real answers there.

Except that specific examples are discouraged at Q&A, they want only rules clarification rather than pre-inspection.
I'm exploring theoretical ways to use the bumper frame as 18 lbs of robot frame stiffener. There is no limit on how far inside the robot perimeter that the bumper side of the interlocking brackets can protrude, right? Only a 1" limit on how far outside the robot perimeter for bumper hard parts.
So a 28x38 piece of plywood the shape of the robot frame, with holes for wheels, etc, with bumper plywood mounted to the edges, is all considered bumper mounting hw, and as long the whole thing with foam and fabric and bolts weighs less than 18 lbs, its legal, and could be used to stiffen the frame of the robot. Sound good? To remove the bumpers, pull all the bolts, drop the bumper floor, and lift/drive the robot out of it. Has anyone weighed a 28x38" full perimeter bumper yet, to see how generous 18lbs is?

[Jared Russell]

Anyone else have a head ache?

[T3_1565]

lol... you have no idea... I'm trying to keep track of all this stuff for my team (they are focused on other things besides bumpers right now.. lol) and hopefully our design doesn't end up breaking some bumper rule (as of right now it doesn't but who knows?)

[Collin Fultz]

Originally Posted by jgraber

I'm exploring theoretical ways to use the bumper frame as 18 lbs of robot frame stiffener. There is no limit on how far inside the robot perimeter that the bumper side of the interlocking brackets can protrude, right? Only a 1" limit on how far outside the robot perimeter for bumper hard parts.

Except that R08-L says "The BUMPERS must be fixed to the BUMPER PERIMETER."