pic: almost there - Page 2

Stillen · #16 07-02-2009, 13:18

guys see my next picture for the solution....i'm posting it now

Greg Needel · #17 07-02-2009, 13:18

ok, let me break this down easily.

Each corner must have 6 inches on either side of it

And

Your robot must have bumpers covering 2/3 of the robot.

and

the bumpers must be supported along the whole length of the wood

See the attached image for a possible fix for your frame.

Stillen · #18 07-02-2009, 13:34

THANK you for the visual aide. I appreciate the assistance .... I tried to post an updated pic in this thread but i couldnt figure out how. I ended up posting another pic in a different thread... sorry

Stillen · #19 07-02-2009, 15:12

Look at figure 8-2, upper left corner and it shows a bumper overhang with no backer.

Stillen · #20 07-02-2009, 15:15

Quote:

Originally Posted by chiquita77

What exactly is the height of your robot. Im just curios as to if there is going to be anything on top

Currently 54" with the shooter on the turrent mounted. We may add a roller at the top but we would still be under the 60" mark.

EricH · #21 07-02-2009, 15:19

Quote:

Originally Posted by Stillen

Look at figure 8-2, upper left corner and it shows a bumper overhang with no backer.

And the overhang isn't counted in the bumper length.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Almost Tipped	TJ09	Extra Discussion	12	07-01-2008 21:53
pic: Almost there...	Mandi_\|<o>\|	Extra Discussion	2	20-02-2007 17:19
pic: Team 759 CAD pic (almost finished)	oljomo	Extra Discussion	6	01-03-2005 16:31
pic: 1023 almost there!	CD47-Bot	Robot Showcase	2	21-02-2004 17:54
pic: Team 254 robot....almost there!	CD47-Bot	Robot Showcase	7	18-02-2004 16:17