pic: 233 Pink Roccobot 2k9

[ducttapedude]

Originally Posted by sdcantrell56

The design work is absolutely amazing. I can't imagine how many hours went in to all of the CAD work. I have the same question...can you shoot down? Also are the drive modules machined tube again?

I love the bot and it would be awesome to see some video.

Lots and lots of CAD.
I can truly say that this build season, of my four years in FIRST, has been the busiest, the most stressful, and the most work I've ever done. I've loved every minute of it, and learned more than any other year.

As to answer you question, it cannot tilt down, but we have a magnetic sensor on the Fischer price gear box for the flywheel that monitors rotations, we have programing so that the closer the trailer is, the slower the flywheel spins, thus adjusting how far the balls will go. We utilized similar ideas on 2k6.

[sdcantrell56]

Originally Posted by ducttapedude

Lots and lots of CAD.
As to answer you question, it cannot tilt down, but we have a magnetic sensor on the Fischer price gear box for the flywheel that monitors rotations, we have programing so that the closer the trailer is, the slower the flywheel spins, thus adjusting how far the balls will go. We utilized similar ideas on 2k6.

If any team can pull off a shooter without an adjustable hood it will be you guys. I hope it works for you. How many balls per second can you guys shoot and do you have the tracking working well?

Also just curious...how much sheet aluminum do you guys go through?

[ducttapedude]

Originally Posted by ducttapedude

Lots and lots of CAD.
I can truly say that this build season, of my four years in FIRST, has been the busiest, the most stressful, and the most work I've ever done. I've loved every minute of it, and learned more than any other year.

As to answer you question, it cannot tilt down, but we have a magnetic sensor on the Fischer price gear box for the flywheel that monitors rotations, we have programing so that the closer the trailer is, the slower the flywheel spins, thus adjusting how far the balls will go. We utilized similar ideas on 2k6.

Sorry, I missed your other question.

Yes, the drive rails are 3x3 box tubing 1/8th thick aluminum.

Many similar ideas, yet everything as always has been modified, been made smaller, lighter, and hopefully better : )

[Eugene Fang]

No pink or telescoping arm...

Very cool though!

[Akash Rastogi]

Originally Posted by ducttapedude

As to answer you question, it cannot tilt down, but we have a magnetic sensor on the Fischer price gear box for the flywheel that monitors rotations, we have programing so that the closer the trailer is, the slower the flywheel spins, thus adjusting how far the balls will go. We utilized similar ideas on 2k6.

Ahh very nice. Can't wait to see it in action.

[hillale]

Just curious, but why did you abandon the human loaded hopper? Orbit balls getting jammed going into the shooter feed?

[Gabe Salas Jr.]

Originally Posted by hillale

Just curious, but why did you abandon the human loaded hopper? Orbit balls getting jammed going into the shooter feed?

...I plead the 5th.

Originally Posted by 1086VEX

how far does your turret rotate, and how many balls can it hold?

I believe the turret rotates to about 233 degrees (oh okay close to it... don't remember specifically). We carry roughly 14 cells.

Originally Posted by rc_cola1323

Did you guys use Pro.E or Solidworks this year. Can't wait to see your bot upclose and did you guys end up powdercoating your bot Blue or Black (I have a pic of you guys blue one year?)

Pro.E
You are probably thinking about Roccobot 2k or 2k2. No powdercoating this year. We left it gray and angry.

Originally Posted by rtfgnow

But really, I would like to know your top speed, amount of balls you can hold, and how fast can you shoot out the balls (balls/minute).

I would like to answer these questions (look up for amount of cells we carry) but we have some serious work to do on Thursday in hopes of improving our numbers to a more acceptable level. So sorry, won't give exacts. Ask again after Thursday.
__________

Thanks Alex and Dillion, we will keep that in mind on Thursday. Video of us powering Roccobot 2k9 for the first time.

[Enigma's puzzle]

Holy Cheesehole batman

[Dan Petrovic]

At least the bumpers will be pink...right? *sob*

These robots are always impressive when you think of how much CAD work goes into them. This team is blessed with machine shops that can keep up with the drawings that are being fed to them.

233 may have themselves a third Einstein appearance in a row.

[typharn91]

This thing looks amazing I can't wait to sneek a peak of it on Thursday kinda sad about the lack of pink on it I really wanna see how you guys did you wiring this year

[Gabe Salas Jr.]

Originally Posted by InfernoX14

At least the bumpers will be pink...right? *sob*

There is one part of the robot that is actually PINK.

Originally Posted by typharn91

This thing looks amazing I can't wait to sneek a peak of it on Thursday kinda sad about the lack of pink on it I really wanna see how you guys did you wiring this year

You can see most of the ground work here. Posted this since it will be very difficult to check out with everything else on top.

[thefro526]

That's a Nice Robot but the Pro-E Model is even nicer.

I showed that Model to my mentor at work and he was amazed that you were able to make something that nice in 2 weeks. How many people worked on it? I'm assuming that it was a group of people because that would be almost impossible to do with one person. (Then again, you are the PINK team.)

Back to the robot though, that is by far one of the most beautiful robot's I've ever seen. I'd love to see it function, something tells me I'd be very fun to watch the balls snake through that delivery system.

[amariealbrecht]

From another team that is clearly a fan of pink....thats very cool and I love the design. Good luck to you all in the rest of the season!

[Jeff 801]

Originally Posted by hillale

Just curious, but why did you abandon the human loaded hopper?

If you look close you can see a part sticking up that looks as though it is going to be used for a hopper still. I am guessing it will show up when it is taken out of the crate at FL

you can see it on these images
http://www.chiefdelphi.com/media/img...b9facd21_l.jpg

and

http://www.chiefdelphi.com/media/img...c0135e94_l.jpg