pic: Ramp Video

[DynamiteHack]

Originally Posted by joeweber

As you can see from the drawing the frame is stationary on level ground and does not articulate. When it goes over the ramp the drive system articulates but the frame remains solid. ( the frame is where the bumpers are attached).

Correct me if I'm wrong, but wouldn't the sections connecting the omnis to the mountings have to get longer/shorter as it tilted? Adding height to the slope gives a longer line.
Unless the mountings can tilt in and out?

[joeweber]

Originally Posted by DynamiteHack

Correct me if I'm wrong, but wouldn't the sections connecting the omnis to the mountings have to get longer/shorter as it tilted? Adding height to the slope gives a longer line.
Unless the mountings can tilt in and out?

The rear virtical strut will pivot at the frame.