pic: Surprise! Your crate was crushed by _____ .

[Collin Fultz]

Originally Posted by pilum40

What do you pack your crate with to protect the bot or do you just stick the robot in the crate and hope it works when you get there? Do y'all use some type of restraining system or packing protective system? I'm a little antsy because of the electronics/CRio, etc. Any help would be appreciated!

Thanks!

Wow...old thread. But, you probably found it by searching, so that's a plus.

We typically strap our robot down in various corners of the crate using ratcheting straps. We tend to try to get one on each corner of the robot with an eye-bolt.

Bottom line - make sure it's secure in the crate. You dont' want your robot rolling around in there.

Good luck!