pic: 2240 Breakaway

[Daniel_LaFleur]

Originally Posted by viperred396

loading photo ...

Well after long nights, mountain dew binges, countless “that’s what she said” jokes our robot is finally done!

Feel free to ask any questions

OK. (You asked for questions )

Can it go over the bump?
Can it go throughh the tunnel?
How far does it kick?
Does it control the ball at all?
Whats it's max speed?
Any thing that you'd like to point out that we might not see?

[DSST\neal.ian]

Originally Posted by Daniel_LaFleur

OK. (You asked for questions )

Can it go over the bump?
Can it go throughh the tunnel?
How far does it kick?
Does it control the ball at all?
Whats it's max speed?
Any thing that you'd like to point out that we might not see?

1. In theory, yes.
2. Yes.
3. We don't know in practice. In theory, all the way across.
4. What does that mean?
5. Roughly 1/2 ft/s, which we hope to improve, if at all possible.
6. Personally, I would like to point out my baby; the control box on the rear of the bot. It swings down and has a sliding tray for the Jaguars to sit on so that we can access the other parts and still fit all of those parts in a 6"x13"x10" volume.

Originally Posted by drtysteve384

looks pretty neat and small...i see the kicker but... can yall go over the bumb, through the tunnel... and how much weight is your robot, cause this year weight wasn't a factor for our team and i was just wondering?

1 and 2 are already answered, and for 3, we have 90 lbs at ship total, but we kept the control board.

[viperred396]

Originally Posted by Daniel_LaFleur

OK. (You asked for questions )

Can it go over the bump?
Can it go throughh the tunnel?
How far does it kick?
Does it control the ball at all?
Whats it's max speed?
Any thing that you'd like to point out that we might not see?

Well Ian took care of the first 4 quesitons but as of now we have no ball control divice but we have room to add one

Also i want to point out the Perf. Aluminium Armor under the bumpers just because of the look of the whole machine

[DSST\neal.ian]

Originally Posted by viperred396

Well Ian took care of the first 4 quesitons but as of now we have no ball control divice but we have room to add one

Also i want to point out the Perf. Aluminium Armor under the bumpers just because of the look of the whole machine

That aluminum also acts as a chain / tread guard. So, what started as decoration provides a functional purpose; we were originally only going to do that only for chain guards.

One more thing; Bryan, can you post a picture of the back / inside of the bot, for a little more insight? (Pun intended.)

[viperred396]

Originally Posted by DSST\neal.ian

That aluminum also acts as a chain / tread guard. So, what started as decoration provides a functional purpose; we were originally only going to do that only for chain guards.

One more thing; Bryan, can you post a picture of the back / inside of the bot, for a little more insight? (Pun intended.)

Sorry Ian we dont have a pic from that angle i guess we will have to wait for our regional

[DSST\neal.ian]

Originally Posted by viperred396

Sorry Ian we dont have a pic from that angle i guess we will have to wait for our regional

So, you're not allowed to touch a stable gun OR a camera. Good to know.

[Bill_B]

Originally Posted by DSST\neal.ian

So, you're not allowed to touch a stable gun OR a camera. Good to know.

Stable gun? is that the one from the movie "they shoot horses, don't they?" Hey, hey, HAY!

[viperred396]

Originally Posted by Bill_B

Stable gun? is that the one from the movie "they shoot horses, don't they?" Hey, hey, HAY!

haha good catch