Go to Post The world is run by those who show up. - AdamHeard [more]
Home
Go Back   Chief Delphi > ChiefDelphi.com Website > Extra Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 04-15-2018, 09:52 AM
asid61's Avatar
asid61 asid61 is offline
Design Simple
AKA: Anand Rajamani
FRC #1072 (Harker Robotics)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Cupertino, CA
Posts: 2,848
asid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond repute
pic: GBX-162, Realistic Swerve

Reply With Quote
  #2   Spotlight this post!  
Unread 04-15-2018, 09:54 AM
Billfred's Avatar
Billfred Billfred is offline
needs to go to Bayou
AKA: New Orleans is rough on streaks.
FRC #1293 (Pandamaniacs); FTC #11444 (Garnet Squadron)
Team Role: Mentor
 
Join Date: Feb 2004
Rookie Year: 2004
Location: West Columbia, SC
Posts: 9,311
Billfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond reputeBillfred has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

You always have the most gorgeous renders.

One thing I noticed about your mounting: Have you considered 1533-style slots instead of the holes? It nerfs some of the pocketing, but it does give you the ability to locate it along any length of VersaFrame without having to poke new holes in the tubing.
__________________
William "Billfred" Leverette - Gamecock/Jessica Boucher victim/Owner/Director of Bricks 4 Kidz in Columbia, SC.

2004-2006: FRC 1293 (D5 Robotics) - Student, Mentor, Coach
2007-2009: FRC 1618 (Capital Robotics) - Mentor, Coach
2009-2013: FRC 2815 (Los Pollos Locos) - Mentor, Coach - Palmetto '09, Peachtree '11, Palmetto '11, Palmetto '12
2010: FRC 1398 (Keenan Robo-Raiders) - Mentor - Palmetto '10
2014-2016: FRC 4901 (Garnet Squadron) - Co-Founder and Head Bot Coach - Orlando '14, SCRIW '16
2017: FRC 5402 (Iron Kings) - Mentor, Coach
2018-: FRC 1293 (Pandamaniacs) - Mentor

112 events (more than will fit in a ChiefDelphi signature), 15 seasons, over 72,000 miles, and still on a mission from Bob.
Rule #1: Do not die. Rule #2: Be respectful. Rule #3: Be safe. Rule #4: Follow the handbook.
Reply With Quote
  #3   Spotlight this post!  
Unread 04-15-2018, 10:13 AM
C4's Avatar
C4 C4 is online now
Registered User
FRC #4505 (McDonogh Robotics)
Team Role: Student
 
Join Date: Oct 2016
Rookie Year: 2017
Location: Maryland
Posts: 123
C4 is a splendid one to beholdC4 is a splendid one to beholdC4 is a splendid one to beholdC4 is a splendid one to beholdC4 is a splendid one to beholdC4 is a splendid one to beholdC4 is a splendid one to behold
Re: pic: GBX-162, Realistic Swerve

Do you have the parts list/CAD for this?
__________________
“When you're a winner you're always happy, but if you're happy as a loser… you'll always be a loser.”
Reply With Quote
  #4   Spotlight this post!  
Unread 04-15-2018, 10:20 AM
Oblarg Oblarg is offline
Registered User
AKA: Eli Barnett
FRC #0449 (The Blair Robot Project)
Team Role: Mentor
 
Join Date: Mar 2009
Rookie Year: 2008
Location: Philadelphia, PA
Posts: 1,840
Oblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond reputeOblarg has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

It's a small thing, but thank you for listing free speed rather than "top speed" with some unknown/arbitrary "speed loss constant" applied to it.
__________________
"Mmmmm, chain grease and aluminum shavings..."
"The breakfast of champions!"

Member, FRC Team 449: 2007-2010
Drive Mechanics Lead, FRC Team 449: 2009-2010
Alumnus/Technical Mentor, FRC Team 449: 2010-Present
Lead Technical Mentor, FRC Team 4464: 2012-2015
Technical Mentor, FRC Team 5830: 2015-2016


FRC Drivetrain Characterization
Reply With Quote
  #5   Spotlight this post!  
Unread 04-15-2018, 10:28 AM
s_forbes's Avatar
s_forbes s_forbes is offline
anonymous internet person
FRC #0842 (Falcon Robotics)
Team Role: Engineer
 
Join Date: Jan 2006
Rookie Year: 2006
Location: Phoenix, AZ
Posts: 1,396
s_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

Nice and compact! Is that a ball bearing on the end of the CIM shaft and in the center of the large rotational gear? I would omit that part for fear of overconstraining the motor shaft. The shaft is strong enough to support the pinion without that bearing.

What is being used for the large bearing for the module rotation?
Reply With Quote
  #6   Spotlight this post!  
Unread 04-15-2018, 11:27 AM
caleb7hayes caleb7hayes is offline
Registered User
AKA: Caleb Hayes
FRC #2910 (Jack In The Bot)
Team Role: Mechanical
 
Join Date: Jan 2016
Rookie Year: 2015
Location: washington
Posts: 25
caleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant futurecaleb7hayes has a brilliant future
Re: pic: GBX-162, Realistic Swerve

I'm asking this because I can't clearly see it, but how are you planning on mounting encoders to track distance and rotation of your module? Beyond that it looks great, good work!
Reply With Quote
  #7   Spotlight this post!  
Unread 04-15-2018, 01:14 PM
NerdRage's Avatar
NerdRage NerdRage is offline
Supreme Dictator
AKA: Aaron Fang
FRC #3863 (Pantherbotics)
Team Role: Student
 
Join Date: Apr 2016
Rookie Year: 2016
Location: Newbury Park, CA
Posts: 41
NerdRage will become famous soon enough
Re: pic: GBX-162, Realistic Swerve

I love the packaging and small form factor of this swerve! Having attempted to design swerve on my own multiple times, I understand how difficult it is to get something nicely packaged. I was wondering if those screws on the bottom were all the support that the fork gets in terms of radial loads? Do you have another bearing, or is all the load through the bolts on the bottom? Also, what do you have in terms of taking the thrust load?
__________________
FIRST Stronghold - LA Regional Judge's Award & Quarterfinalists, Ventura Regional Quarterfinalists

FIRST Steamworks - Orange County Quarterfinalists

FIRST Power Up - LA Regional Quarterfinalists, Ventura Regional Semifinalists
Reply With Quote
  #8   Spotlight this post!  
Unread 04-15-2018, 02:03 PM
asid61's Avatar
asid61 asid61 is offline
Design Simple
AKA: Anand Rajamani
FRC #1072 (Harker Robotics)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Cupertino, CA
Posts: 2,848
asid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by Billfred View Post
You always have the most gorgeous renders.

One thing I noticed about your mounting: Have you considered 1533-style slots instead of the holes? It nerfs some of the pocketing, but it does give you the ability to locate it along any length of VersaFrame without having to poke new holes in the tubing.
You know, my renders used to look only decent until I saw Nick Coussen do a render on a dark background, so now I use the same background for all my renders.
I like the idea of the slots, but I don't particularly see the need honestly. I don't like using Versaframe over just making my own tubing, after spending hours this year getting VF just right. Given that we have a CNC and a manual mill, it's actually faster for us just to cut tubes to length on the manual rather than use VF.

Quote:
Originally Posted by C4 View Post
Do you have the parts list/CAD for this?
I'm just generating the STEP and Pack&Go files now, and will update the description with the link as soon as that's done.

Quote:
Originally Posted by Oblarg View Post
It's a small thing, but thank you for listing free speed rather than "top speed" with some unknown/arbitrary "speed loss constant" applied to it.
I always get mildly peeved when I see "adjusted" speed listed. Adjusted for what?

Quote:
Originally Posted by s_forbes View Post
Nice and compact! Is that a ball bearing on the end of the CIM shaft and in the center of the large rotational gear? I would omit that part for fear of overconstraining the motor shaft. The shaft is strong enough to support the pinion without that bearing.

What is being used for the large bearing for the module rotation?
There's a balance to be struck here with the overconstraining. On one hand I agree with you and don't want to risk the shaft binding. But on the other hand, if I don't have it, tolerances could totally throw the spacing of the CIM pinion off relative to its meshing gear. Tricky, tricky stuff. I'll probably remove to make room for an AMT CIMcoder on the CIM shaft.
I'm using a 6814 bearing, 70mm inner by 90mm outer, 10mm thick. Very cheap alternatives to the Silverthin bearings a lot of designs use.

Quote:
Originally Posted by caleb7hayes View Post
I'm asking this because I can't clearly see it, but how are you planning on mounting encoders to track distance and rotation of your module? Beyond that it looks great, good work!
Whoops, I knew I forgot something! The plan was to use Muchskull's AMT CIMcoder for the drive, I'll add that in before releasing the CAD. Rotation is settled with a Versaplanetary Integrated Encoder.

Quote:
Originally Posted by NerdRage View Post
I love the packaging and small form factor of this swerve! Having attempted to design swerve on my own multiple times, I understand how difficult it is to get something nicely packaged. I was wondering if those screws on the bottom were all the support that the fork gets in terms of radial loads? Do you have another bearing, or is all the load through the bolts on the bottom? Also, what do you have in terms of taking the thrust load?
The setup here is similar to the one 1323 runs, so I'm not too worried about most of the lower module specifics. The screw is a dead axle for the wheel, and the forks are attached to the turning gear by means of 4 10-32 screws tapped into the forks with a couple of tiny pins on one fork for locating the bevel gear. Because of the small wheel it's quite easy to make it compact and strong.
If you mean the thrust loads from the bevel gear, those are taken just on regular ball bearings. Other swerves have run the same setup without issues. There is space for a roller thrust bearing, but I wouldn't add it unless I needed it.
__________________
Team 1072 2017-present
Team 299 2017
Team 115 2013-2016

2018 Davis Finalists (w/ 6474 and 3880)
2018 Roebling Winners (w/ 3476, 1323, and 1778)


Reply With Quote
  #9   Spotlight this post!  
Unread 04-15-2018, 02:10 PM
Andrew_L's Avatar
Andrew_L Andrew_L is offline
Learn to crawl before you ball
AKA: #BeTheBest
FRC #0299 (Valkyrie Robotics)
Team Role: Mentor
 
Join Date: Sep 2016
Rookie Year: 2011
Location: San Jose
Posts: 397
Andrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

Is it realistic because you're never gonna use it?
Reply With Quote
  #10   Spotlight this post!  
Unread 04-15-2018, 02:37 PM
AdamHeard's Avatar
AdamHeard AdamHeard is offline
Lead Mentor
FRC #0973 (Greybots)
Team Role: Mentor
 
Join Date: Oct 2004
Rookie Year: 2004
Location: Atascadero
Posts: 5,939
AdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond reputeAdamHeard has a reputation beyond repute
Send a message via AIM to AdamHeard
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by Andrew_L View Post
Is it realistic because you're never gonna use it?
__________________
Get your cascade elevators and PowerCube claws!
2x1 and 2x2 1/16" wall tubing for sale!

Need help? Check out 973 Remote Assistance and Mentorship Program.
Like our Robots? Check out the CAD files of MOST of our robots!

2017 "World Champions"
2014 Galileo Champions
2011 World Champions

Last edited by AdamHeard : 04-15-2018 at 02:42 PM.
Reply With Quote
  #11   Spotlight this post!  
Unread 04-15-2018, 02:53 PM
leafy1072's Avatar
leafy1072 leafy1072 is offline
Registered User
FRC #1072
Team Role: Driver
 
Join Date: Jun 2017
Rookie Year: 2016
Location: California
Posts: 24
leafy1072 is a jewel in the roughleafy1072 is a jewel in the roughleafy1072 is a jewel in the roughleafy1072 is a jewel in the rough
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by Andrew_L View Post
Is it realistic because you're never gonna use it?
Is it realistic if you make it and it doesn’t work?
Reply With Quote
  #12   Spotlight this post!  
Unread 04-15-2018, 02:57 PM
Andrew_L's Avatar
Andrew_L Andrew_L is offline
Learn to crawl before you ball
AKA: #BeTheBest
FRC #0299 (Valkyrie Robotics)
Team Role: Mentor
 
Join Date: Sep 2016
Rookie Year: 2011
Location: San Jose
Posts: 397
Andrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond reputeAndrew_L has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by leafy1072 View Post
Is it realistic if you make it and it doesn’t work?
You know Anand just as well as I do - no way he'd make a swerve in season.
Reply With Quote
  #13   Spotlight this post!  
Unread 04-15-2018, 02:57 PM
asid61's Avatar
asid61 asid61 is offline
Design Simple
AKA: Anand Rajamani
FRC #1072 (Harker Robotics)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Cupertino, CA
Posts: 2,848
asid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond repute
Re: pic: GBX-162, Realistic Swerve

Link to CAD models (also in description): https://workbench.grabcad.com/workbe...IQSQ0z1UVX5D8O

I added Munchskull's CIMcoder and removed the bearing in the middle gear.

Quote:
Originally Posted by Andrew_L View Post
You know Anand just as well as I do - no way he'd make a swerve in season.
Bingo. Not worth the time it takes IMO. COTS swerves, however, are on the table. The Swerve&Steer still has numerous issues, but here's to hoping for improvements!
__________________
Team 1072 2017-present
Team 299 2017
Team 115 2013-2016

2018 Davis Finalists (w/ 6474 and 3880)
2018 Roebling Winners (w/ 3476, 1323, and 1778)


Reply With Quote
  #14   Spotlight this post!  
Unread 04-15-2018, 03:10 PM
leafy1072's Avatar
leafy1072 leafy1072 is offline
Registered User
FRC #1072
Team Role: Driver
 
Join Date: Jun 2017
Rookie Year: 2016
Location: California
Posts: 24
leafy1072 is a jewel in the roughleafy1072 is a jewel in the roughleafy1072 is a jewel in the roughleafy1072 is a jewel in the rough
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by asid61 View Post

Bingo. Not worth the time it takes IMO. COTS swerves, however, are on the table. The Swerve&Steer still has numerous issues, but here's to hoping for improvements!
#SomeoneElsePleaseMakeSwerve

Last edited by leafy1072 : 04-15-2018 at 03:20 PM.
Reply With Quote
  #15   Spotlight this post!  
Unread 04-15-2018, 04:35 PM
ollien ollien is online now
Registered User
FRC #5202
Team Role: Alumni
 
Join Date: Feb 2015
Rookie Year: 2015
Location: United States
Posts: 559
ollien is a splendid one to beholdollien is a splendid one to beholdollien is a splendid one to beholdollien is a splendid one to beholdollien is a splendid one to beholdollien is a splendid one to beholdollien is a splendid one to behold
Re: pic: GBX-162, Realistic Swerve

Quote:
Originally Posted by asid61 View Post
Link to CAD models (also in description): https://workbench.grabcad.com/workbe...IQSQ0z1UVX5D8O

I added Munchskull's CIMcoder and removed the bearing in the middle gear.



Bingo. Not worth the time it takes IMO. COTS swerves, however, are on the table. The Swerve&Steer still has numerous issues, but here's to hoping for improvements!
Care to detail what's wrong with Swerve&Steer?
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:14 PM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi