Go to Post Congratulations! Welcome to the hardest fun you'll ever have. - Undertones [more]
Go Back   Chief Delphi > Technical > Electrical > CAN
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 07-27-2018, 04:10 PM
pcampbell pcampbell is offline
Registered User
no team
Join Date: Sep 2017
Location: Michigan
Posts: 21
pcampbell is an unknown quantity at this point
How does the WPI CAN SEND function work?

I'm currently working on creating CAN communication between the roboRIO and an Arduino Uno MCP2515 CAN-BUS shield.
My end goal is to have the roboRIO communicating with a RoboteQ MDC1460 Brushed DC Motor Controller but first wanted to understand how CAN communication works with an Arduino and wanted to be able to see the received information before controlling a motor.
I'm struggling understanding how the CAN SEND function in LabView works.
I have a simple LabView program using the CAN SEND from the WPI Robotics Library and the Arduino is receiving information from the roboRIO but not the information I have programmed on the roboRIO. I am also receiving an ERROR(-44088) on the CAN SEND function. I have the bit rate set at 1000KBPS. The Arduino is only receiving an ID and not the ID I wrote on the program and not getting any of the programmed data. Could anyone explain how the WPI CAN functions work? Or any other suggestions as to what I might be doing wrong?
Thank you
Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 09:26 PM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.

Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi