|
|
|
 A wrench isn't a nesscary part is it?
Last Night, we tested the robot and a large, (yes I said LARGE) wrench fell from somewhere on the robot....Along with bolts, nuts, and a very interestingly cut piece of Aluminum... - Will Bale [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
R3 - University Rover Challenge
Hey everyone,
We at Ryerson Rams Robotics(R3) wanted to share with you our System Acceptance Review for the University Rover Challenge, our team is mostly comprised of former FRC students and we wanted to give you a glimpse into how you could continue your robotics experience. The University Rover Challenge is an annual competition hosted by the Mars Society in Utah. The competition features universities from all around the world, and challenges teams to design and build a rover to compete in increasingly difficult tasks. Our rover features a unique double lambda boogie suspension, as well as 6 DOF scara arm. https://youtu.be/AaTc67xcTg8 Good luck to all teams this competition season! 
|
|
#2
03-06-2018, 06:05 PM
|
||||
|
||||
|
Re: R3 - University Rover Challenge
The people that made it must be pretty awesome!
|
|
#3
04-06-2018, 11:20 AM
|
||||
|
||||
|
Re: R3 - University Rover Challenge
I was looking through and I’ve found it really great! So I believe your project will succeed. Also still reading about ungrouped data example problems to start working on my thesis
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
