Go to Post Same as regrets in life: Learn from them. This is called "growth". - DonRotolo [more]
Home
Go Back   Chief Delphi > Technical > Kit & Additional Hardware
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 02-05-2018, 08:26 PM
bmammen's Avatar
bmammen bmammen is offline
Registered User
AKA: Brent Mammen
FRC #5801 (Inspire)
Team Role: Mentor
 
Join Date: Oct 2014
Rookie Year: 2014
Location: Lee's Summit, MO
Posts: 78
bmammen will become famous soon enough
1" REV Extrusion needed - (2) 72" pieces

Team 5801 is looking for anyone who might have two 6' pieces of REV 1" Extrusion to finish our lift! Willing to pay cost + shipping - etc. (or trade).

We're looking at alternative extrusions but just need the 2 pieces to finish what we've built and keep the same material. If you have some you're willing to part with please let us know!
Reply With Quote
  #2   Spotlight this post!  
Unread 02-05-2018, 11:02 PM
snoman's Avatar
snoman snoman is offline
Registered User
FRC #3275 (Accelerators 3134 & Regulators 3275)
Team Role: Coach
 
Join Date: Jan 2014
Rookie Year: 2012
Location: Minnesota
Posts: 509
snoman is a glorious beacon of lightsnoman is a glorious beacon of lightsnoman is a glorious beacon of lightsnoman is a glorious beacon of lightsnoman is a glorious beacon of lightsnoman is a glorious beacon of light
Re: 1" REV Extrusion needed - (2) 72" pieces

Did you try your neighbor 1986?
__________________
Coach of the Cass Lake Bena Regulators 3275 (Boys)and mentor Accelerators 3134(Girls)
President of the NMRC (Northern Minnesota Robotics Conference )
https://www.facebook.com/accerleratorsandregulators/
https://www.youtube.com/channel/UCQU...Cr8I4wezAbMefA



Reply With Quote
  #3   Spotlight this post!  
Unread 02-06-2018, 02:33 PM
Alpha Beta's Avatar
Alpha Beta Alpha Beta is offline
Ardent Supporter
AKA: Mr. Aaron Bailey
FRC #1986 (Team TITANium)
 
Join Date: Mar 2008
Rookie Year: 2007
Location: Lee's Summit, Missouri
Posts: 837
Alpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond reputeAlpha Beta has a reputation beyond repute
Re: 1" REV Extrusion needed - (2) 72" pieces

Quote:
Originally Posted by snoman View Post
Did you try your neighbor 1986?
Would share if we had it. To the best of my knowledge we've not used REV extrusion. Hope you find what you need out there.
__________________
Regional Wins: 2018, 2017, 2016, 2015(2), 2014(2), 2013(3), 2012(2), 2011, 2010
Regional Chairman's Award: 2014, 2009
Engineering Inspiration: 2018, 2016, 2012, 2011
Dean's List Finalists: 2018(Justice W), 2016(Jacob S), 2014(Cameron L), 2013(Jay U), 2012(Laura S), 2011(Dominic A), 2010(Collin R)
Woodie Flowers Finalist 2018 (Nancy Spatz), 2013 (Aaron Bailey)
Championships: Einstein Finalist (2017), Sub-Division Champion (2017, 2016), Finalist (2013, 2010), Semifinalist (2014), Quaterfinalist (2018, 2015, 2012, 2011)
Other Official Awards: Gracious Professionalism (2013) Entrepreneurship (2017, 2013), Quality (2017, 2015, 2015, 2013), Engineering Excellence (Champs 2013, 2012), Website (2011), Industrial Design (Curie/Darwin 2017, Archimedes/Tesla 2016, 2016, 2015, Newton 2014, 2013, 2011), Innovation in Control (2018, 2014, Champs 2010, 2010, 2008, 2008), Imagery (2009), Safety(2017), Regional Finalist (2017, 2016, 2015, 2008)
Reply With Quote
  #4   Spotlight this post!  
Unread 02-06-2018, 04:06 PM
bmammen's Avatar
bmammen bmammen is offline
Registered User
AKA: Brent Mammen
FRC #5801 (Inspire)
Team Role: Mentor
 
Join Date: Oct 2014
Rookie Year: 2014
Location: Lee's Summit, MO
Posts: 78
bmammen will become famous soon enough
Re: 1" REV Extrusion needed - (2) 72" pieces

Quote:
Originally Posted by Alpha Beta View Post
Would share if we had it. To the best of my knowledge we've not used REV extrusion. Hope you find what you need out there.
Thanks anyway, hope you guys are getting it done over there!
Reply With Quote
  #5   Spotlight this post!  
Unread 02-06-2018, 05:20 PM
CEF CEF is offline
Registered User
FRC #5607
 
Join Date: Nov 2016
Location: Raleigh, NC
Posts: 148
CEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant futureCEF has a brilliant future
Re: 1" REV Extrusion needed - (2) 72" pieces

6 foot lengths?

Note that you don't really need the REV extrusion for the horizontal pieces -- you can use 1" square aluminum extrusion for that (like the versaframe 1x1). You only need the REV stuff for the verticals, because that's what their V-groove bearings ride in. (Of course, if you've already made your cuts....)

It came in the KOP, and not every team is using it, so there should be plenty of teams out there with some to spare.
Reply With Quote
  #6   Spotlight this post!  
Unread 02-06-2018, 05:45 PM
bmammen's Avatar
bmammen bmammen is offline
Registered User
AKA: Brent Mammen
FRC #5801 (Inspire)
Team Role: Mentor
 
Join Date: Oct 2014
Rookie Year: 2014
Location: Lee's Summit, MO
Posts: 78
bmammen will become famous soon enough
Re: 1" REV Extrusion needed - (2) 72" pieces

Quote:
Originally Posted by CEF View Post
6 foot lengths?

Note that you don't really need the REV extrusion for the horizontal pieces -- you can use 1" square aluminum extrusion for that (like the versaframe 1x1). You only need the REV stuff for the verticals, because that's what their V-groove bearings ride in. (Of course, if you've already made your cuts....)

It came in the KOP, and not every team is using it, so there should be plenty of teams out there with some to spare.
Correct, we are specifically looking for 6' REV for the 10-32 nut grooves. We have some 80/20 extrusion but would rather not have to go down the T-slot route for just 2 runs. REV discontinued their 6' sections either last season or the season before that. We had some, just not quite enough - a hopeful request to find a team willing to part with them....
Reply With Quote
  #7   Spotlight this post!  
Unread 02-06-2018, 07:59 PM
NathanNFM's Avatar
NathanNFM NathanNFM is offline
AndyMark Mechanical Engineer
AKA: Nathan
FRC #3940 (CyberTooth)
Team Role: Mentor
 
Join Date: Jun 2010
Rookie Year: 2005
Location: Kokomo, IN
Posts: 404
NathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond repute
Re: 1" REV Extrusion needed - (2) 72" pieces

We may have some in our "scratch and dent" pile, I will check in the morning. Do you need all 4 tracks to be fully dent free?
__________________

[2016-20??]: Mentor: FRC Team 3940"CyberTooth"
[2013-2016]: Mentor: FRC Team 365 "MOE"
[2012-2013]: Mentor: FRC Team 3929 "Atomic Dragons"
[2011-2012]: Mentor: FRC Team 365 "MOE"
[2008-2011]: Student: FRC Team 365 "MOE"
[2007-2008]: Student: FTC Team 365 "MOE"
[2005-2007]: Student: FLL Team "The MOEstangs"
Reply With Quote
  #8   Spotlight this post!  
Unread 02-06-2018, 09:57 PM
bmammen's Avatar
bmammen bmammen is offline
Registered User
AKA: Brent Mammen
FRC #5801 (Inspire)
Team Role: Mentor
 
Join Date: Oct 2014
Rookie Year: 2014
Location: Lee's Summit, MO
Posts: 78
bmammen will become famous soon enough
Re: 1" REV Extrusion needed - (2) 72" pieces

Quote:
Originally Posted by NathanNFM View Post
We may have some in our "scratch and dent" pile, I will check in the morning. Do you need all 4 tracks to be fully dent free?
That would be great! No, all 4 wouldn't need to be dent free.
Let us know. Appreciate it.
Reply With Quote
  #9   Spotlight this post!  
Unread 02-07-2018, 09:36 PM
NathanNFM's Avatar
NathanNFM NathanNFM is offline
AndyMark Mechanical Engineer
AKA: Nathan
FRC #3940 (CyberTooth)
Team Role: Mentor
 
Join Date: Jun 2010
Rookie Year: 2005
Location: Kokomo, IN
Posts: 404
NathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond reputeNathanNFM has a reputation beyond repute
Re: 1" REV Extrusion needed - (2) 72" pieces

Your order should be arriving by Friday, glad we could help out!
__________________

[2016-20??]: Mentor: FRC Team 3940"CyberTooth"
[2013-2016]: Mentor: FRC Team 365 "MOE"
[2012-2013]: Mentor: FRC Team 3929 "Atomic Dragons"
[2011-2012]: Mentor: FRC Team 365 "MOE"
[2008-2011]: Student: FRC Team 365 "MOE"
[2007-2008]: Student: FTC Team 365 "MOE"
[2005-2007]: Student: FLL Team "The MOEstangs"
Reply With Quote
  #10   Spotlight this post!  
Unread 02-07-2018, 09:57 PM
bmammen's Avatar
bmammen bmammen is offline
Registered User
AKA: Brent Mammen
FRC #5801 (Inspire)
Team Role: Mentor
 
Join Date: Oct 2014
Rookie Year: 2014
Location: Lee's Summit, MO
Posts: 78
bmammen will become famous soon enough
Re: 1" REV Extrusion needed - (2) 72" pieces

Quote:
Originally Posted by NathanNFM View Post
Your order should be arriving by Friday, glad we could help out!
Told the team, you ROCK thanks!
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:11 AM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi