|
|
|
 So is it important to try? Without a doubt. Does it become frustrating to not win? Most certainly. Should you stop trying? Never! - Al Skierkiewicz [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| So is it important to try? Without a doubt. Does it become frustrating to not win? Most certainly. Should you stop trying? Never! - Al Skierkiewicz [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Kinect Not Recognizing X and Z Axis
After deploying the robot code and enabling the code the y axis is only working. Tried doing movements after the program was disabled and still no movement on the kinect skeleton indicator for the x and z axis values.
|
|
#2
25-01-2012, 15:48
|
||||||
|
||||||
|
Re: Kinect Not Recognizing X and Z Axis
As described in the Getting started with Kinect document, there are only pre-programmed gestures for the Y axis, and some buttons. If you want to define gestures for X and Z, you would need to modify the Kinect Server as described in the document.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
