|
|
|
 - Only think of Gracious Professionalism as a standard to work toward personally.
- Never use it as a gauge to point out someone else’s shortcomings. - Rich Kressly [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| - Only think of Gracious Professionalism as a standard to work toward personally.
- Never use it as a gauge to point out someone else’s shortcomings. - Rich Kressly [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Default code
Do I have to edit the default code to get a motor hookup to work? I have deployed an unchanged code, all lights are green, and the motor is not running with joystick 1.
I get an axis camer not found in the driver station log as my only error and it is running through a jaguar. PWM 1 and 2 are hooked up with the three prong slot Last edited by Hebrew : 25-01-2012 at 16:39. 
|
|
#2
25-01-2012, 19:53
|
||||
|
||||
|
Re: Default code
Quote:
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
