|
|
|
 Maybe the lesson the internet is trying to teach us is to "Think before you post, the machine is watching and never forgets..." - IKE [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Maybe the lesson the internet is trying to teach us is to "Think before you post, the machine is watching and never forgets..." - IKE [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Fisherprice Motors & Shooter
Hi there everyone,
So my team has decided to use a shooter method and we have decided to use the fisherprice motors due to its speed specifications; however, we are having difficulties with the design aspect of it. We want this motor to ultimately move 2 axles with 2 wheels on each. At first we were thinking of taking the 19 tooth pinion off, but due to lack of tools we want to use the gearbox provided. Do any of you have any suggestions on how to get the gearbox to work with the axle shooters? We have a hesitant idea of getting a rod through the wheel with a gear that hooks up to the gearbox, but there are many problems with that... Thanks in advance!  |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
