|
Blowing spike fuses
Ok here is the setup:
All motors are RS-550 motors
256:1 Banebot on a conveyor system -> VexSpike -> PDBoard (20AMP fuse)
64:1 Banebot on a loader wheel -> VexSpike (@ 2.5 in compression on ball) -> PDBoard (20AMP fuse)
4:1 Banebot on launcher wheel -> Jag -> PDBoard (20AMP fuse)
Wires have been double checked. We have blown three fuses in the spike connected to the 64:1 loader wheel (it lasts for several test runs and then blows and yet never develops enough consistency to pinpoint any one thing).
We have toyed with wiring, code, and fuses (both the standard 20AMP yellow fuses and the reset fuses in the PDboard) and just can't seem to locate our issue. Ideas would be appreciated regarding what we might be missing.
__________________
 Impossible is just a big word for small men who find it easier to live in the world they've been given than to explore the power they have to change it. Impossible is not a fact. It's an opinion. Impossible is not a declaration. It's a dare Impossible is potential. Impossible is temporary. Impossible is nothing.
~ Unknown
|
However, in the end, the renderer is only as good as the artist. - MiNT [more] 
Threaded Mode