|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Bumper help
What are the requirements for the bumpers in relation to the frame? As in how high off the bottom of the frame can the bumpers go?
Last edited by First3729 : 11-02-2012 at 00:21. |
|
#2
|
|||||
|
|||||
|
Re: Bumper help
Quote:
The Bumper Zone, as defined in [R01-2], is between 2 and 10 inches from the floor. According to [R29], Bumpers must be in that zone whenever the robot is standing normally on a flat floor. |
|
#3
|
||||
|
||||
|
Re: Bumper help
Logically, the bumpers must be attached to part of the frame (or an extension there of), every 8 inches. And that extension must be immovable relative to the outermost parts of the frame.
|
|
#4
|
|||
|
|||
|
Re: Bumper help
Thanks everyone this was a big help!
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|