|
|
|
 It is not your banners that make you nor the trophies that line your walls. It is the willingness to be brave in the face of defeat and compassionate in the winds of victory that create you. - MysterE [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
12-02-2012, 09:52
|
|||||
|
|||||
|
Re: Pressure Switch Read out
Out-of-the-box the cRIO just knows if the compressor is running or not.
The pressure switch that comes in the kit just senses a drop below 95psi and a rise above 115psi. For actual pressure you'd need to purchase a pressure transducer sensor that the cRIO could read and return the value to the Dashboard. 
|
|
#3
13-02-2012, 16:06
|
|||||
|
|||||
|
Re: Pressure Switch Read out
The pressure SWITCH is just that - a switch. On or Off, nothing in between.
If you could find a pressure SENSOR you could easily read the pressure.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
