|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
cRio-FRC in BOM
I'm compiling my team's BOM and a thought passed through my mind: the cRio-FRC (the 8 slot version) is not included in this year's KOP. Since it is not included, as per the exact letter of the law, it's cost ($800 with FIRST discount) should be included in the BOM. However, rule [R14] states that no individual part can cost more than $400 and would make the cRio-FRC an illegal part. Surely, the GDC does not intend this, but I thought it was an interesting thought. Anyone else care to share their opinion?
|
|
#2
|
||||
|
||||
|
Re: cRio-FRC in BOM
Surely that is not the intent. But Thursday at the Granite State Regional should be an interesting day.
|
|
#3
|
|||||
|
|||||
|
Re: cRio-FRC in BOM
Hrm. You're correct that it should technically be costed since it's not in the 2012 KoP nor listed as an explicit exception. Practically speaking, it's a simple oversight by the GDC, since they didn't mandate the FRCII and they're not about to make about a thousand veteran bots illegal.
Definitely needs to be Q&A'd. If you can't/won't, then I will. Whoever does should point out that any exception written for it should exclude the possibility of a team using both an FRC and FRCII for free. (Someone totally would.) |
|
#4
|
|||
|
|||
|
Re: cRio-FRC in BOM
A careful reading of R13-A should solve your problem
Quote:
The cRIO-FRC was on last year's checklist in quantity 1 so you're all set and can document the cost as $0. |
|
#5
|
||||
|
||||
|
Re: cRio-FRC in BOM
[R15]
Individual Components or Mechanisms, not excluded in Rule [R13], that are retrieved from previous Robots and used on 2012 Robots must have their undepreciated cost included in the 2012 Robot cost accounting and applied to the overall cost limits. However, the individual modules of the cRIO count as components. So look up their individual cost. We bought a cRIO II, and it is $525, but the modules and base are all under $400. |
|
#6
|
|||||
|
|||||
|
Re: cRio-FRC in BOM
No, Ruffles had the answer. The cRIO is excluded from the cost accounting due to being listed in a previous-year's KOP Checklist.
|
|
#7
|
|||
|
|||
|
Re: cRio-FRC in BOM
But (by the letter of the rule) wouldn't the quantity be limited to zero? Or would it be limited to the quantity of the year of the KOP (one)?
We used two IEC limit switches from the 2010 kit of parts this year, but they were not included in this year's KOP, so they were included with cost in this year's BOM. Is this incorrect? Would two switches be exempt from the cost calculation because two were included in 2010? |
|
#8
|
|||||
|
|||||
|
Re: cRio-FRC in BOM
Quote:
|
|
#9
|
|||
|
|||
|
Re: cRio-FRC in BOM
I think [R13] has an implied phrase, and should be read this way:
Quote:
It would be nice to see an update, a Q&A, or at least if some Lead Robot Inspector were to weigh in on this thread. ;-) Last edited by Cal578 : 27-02-2012 at 21:20. Reason: clarify the part I added to a quote |
|
#10
|
||||
|
||||
|
Re: cRio-FRC in BOM
Quote:
EDIT: Quote:
Last edited by nitneylion452 : 27-02-2012 at 22:23. |
|
#11
|
||||
|
||||
|
Re: cRio-FRC in BOM
Has anyone Q&Ad this? It's clearly a mistake by the GDC, but it would be nice to have official confirmation. Plus, it'll be interesting to see the response the GDC gives as far as a "We missed that" is concerned.
|
|
#12
|
|||
|
|||
|
Re: cRio-FRC in BOM
Quote:
I understand the desire to have an official Q&A answer for reassurance, but I am fairly certain that the "implied phrase" interpretation posted by Cal is correct. |
|
#13
|
||||
|
||||
|
Re: cRio-FRC in BOM
Quote:
I think the confusion is over the phrase "most recent" following the word "any". If "any" refers to any year (which, unless they meant "either" the Rookie or Veteran checklist, I think is the only interpretation), what does "most recent" mean? Logically, it should mean most recent from that year, but [R13] is a mighty weird way to write it. Further, why is this the first time they've used such phrasing/intended such an allowance? I understand the logic behind the deduction, but a Q&A would make me feel a bit better as well. (i.e. Kevin, I for one would really appreciate your offer as well.) |
|
#14
|
|||
|
|||
|
Re: cRio-FRC in BOM
Quote:
I agree the wording is awkward and a Q&A would certainly help put everyone at ease. |
|
#15
|
||||
|
||||
|
Re: cRio-FRC in BOM
Quote:
See you at GSR. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|