|
Does anybody know...
Posted by Nate Smith.
Other on team #66, GM Powertrain/Willow Run HS, from Eastern Michigan University and GM Powertrain.
Posted on 2/16/2000 6:42 PM MST
Have a situation that I was wondering if anyone had encountered in the past...
As a 'decoration' on our machine, we have designed a sound board with an addressable processor, which communicates with the RC through 4 relay modules(4 relays=4-bit binary value=16 addresses.) We are considering a 'keypad' controller for this sound system, which would have a small processor that processed the keypad input and converted it to a 4-bit binary value, which would be sent to the port 4 digital inputs. Does anybody know if this 'keypad' controller would be allowed...i.e., does the 'non-functional decoration' or 'any type, non-illuminated' switches rules?
Nate
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
I used to think FIRST was about my learning experiences, but now that I'm out of high school and am a seasoned veteran of FIRST I've realized that this organization is about more than my own enjoyment, it's about the enjoyment of others. - Jeremiah Johnson [more] 
Linear Mode
