|
|
|
 We love team 71, but playing against them is not one of our favorite things to do. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| We love team 71, but playing against them is not one of our favorite things to do. - Andy Baker [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Deployment to cRio
Anyone available to help a novice deploy a VI to the cRio? Keep getting Real-Time Target error. Have been reading and watching video, and well, I'm just out of time.
Thanks, John  
|
|
#2
14-03-2012, 21:06
|
||||
|
||||
|
Re: Deployment to cRio
The most common errors i have had:
1) Laptop connected to something other than the robot 2) RT target IP address not set correctly in Project Explorer. Should be 10.26.47.2 3) Laptop IP address set incorrectly. Should be 10.26.47.34, or something similar. Last two digits can vary -Should not be set to "configure IP address automatically" 4) Radio not connected to CRIO/ Radio configured incorrectly 5) CRIO imaged to wrong IP address (should be 10.26.47.2) Are you connecting wirelessly or tethered? Last edited by John : 14-03-2012 at 21:09. Reason: forgot to add CRIO IP address
|
|
#3
14-03-2012, 23:58
|
||||
|
||||
|
Re: Deployment to cRio
could you be more specific as to the error?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
