2012 Van Door Motor Circlip Goove

[Spirator]

Hi, does anyone know what the diameter of the circlip groove in the 2012 van door motor is?

[James Tonthat]

There was a van door motor in the 2012 kit?

[DampRobot]

No, he's probably talking about one salvaged from a scrap yard. Usually, the groves are standard sizes based on the diameter of the shaft. If you know the diameter of the shaft, you can find out what e-clip or c-clip you need to use. Also, the depth and diameter of the groove could easily be measured with a pair of digital calipers.

[Gary Dillard]

Originally Posted by James Tonthat

There was a van door motor in the 2012 kit?

Yes there was, available from FIRST Choice

[Gary Dillard]

Technical drawing of the Van Door from previous year's kit; I think the interfaces are the same for the ones they supplied last year:

http://www.usfirst.org/uploadedFiles...2016640238.pdf

[James Tonthat]

Originally Posted by Gary Dillard

Yes there was, available from FIRST Choice

My B.