110V AC to 12V DC suggestion

We also have a CNC mill and CNC lathe, but we're interested in doing this only if we can do it quickly. Milling anything takes too long for my MTV-generation attention span. :) - Madison [more]

		Chief Delphi > Technical > Electrical
110V AC to 12V DC suggestion

Thread Tools

Rate Thread

Display Modes

10-10-2012, 12:51

mglucido

Registered User

FRC #2838

Join Date: Jan 2012

Location: Chesterfield, MO

Posts: 15

mglucido is an unknown quantity at this point

110V AC to 12V DC suggestion

We're building a control system test board (power distribution board, cRIO II, DSC, radio, Jags, et al) and I looking for a team with experience using an AC-to-DC transformer as a substitute for the 12V battery. It'll be easier than lugging around a battery while doing testing.

I see several sites that sell transformers but I don't know enough about the output of the 12V cell to know I'm getting the right thing.

Any help will be greatly appreciated!

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:29.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.