D-link Illegal Firmware (2.02)

[WarrenBlueTown]

My team has opened up the new D-link and tried to step up the bride using the listed utility on FIRST's website but when it comes to the the 'configuring bride" step. The set up fails and says the D-link's firmware is illegal. We have followed all directions give by FIRST and have tried the AP 5ghz setting and the bridge settings and still have received the illegal firmware problem

Please Help

[andreboos]

I receive the same error.

[compboy07]

I solved this quite easily: just flash f/w 2.00.

Steps:
- Download here: ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/dap1522_revB_FW_200.bin
- Go to 192.168.0.50 (obviously with the router plugged into the computer)
- Login as Admin (no pass)
- Go to administration tab and find the firmware upgrade option
- Upload and wait
- Done! Now the Wireless Configuration Utility should work just fine

[kenavt]

Originally Posted by compboy07

I solved this quite easily: just flash f/w 2.00.

Steps:
- Download here: ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/dap1522_revB_FW_200.bin
- Go to 192.168.0.50 (obviously with the router plugged into the computer)
- Login as Admin (no pass)
- Go to administration tab and find the firmware upgrade option
- Upload and wait
- Done! Now the Wireless Configuration Utility should work just fine

We had a rookie workshop today, and every single one one of them had the firmware issue. They were running 2.02, and following this solution ( especially the download link for v2.00) saved us hours of waiting and debugging. Thanks a lot!

[compboy07]

Glad it was of use. Honestly, our team has had no end of problems with them in past years, so I know how they tick by now.

[charsmud]

For some reason, I cannot access the download that you have provided. Could you host the file somewhere so I can download it? That website is timing out for me, and has for the last few hours.

[Joe Ross]

Originally Posted by charsmud

For some reason, I cannot access the download that you have provided. Could you host the file somewhere so I can download it? That website is timing out for me, and has for the last few hours.

It worked for me just now. Are you at a school or something that blocks ftp?

[charsmud]

Hm, I'm at a school, so probably, it's blocking it. Could you upload it do Dropbox or something of the like?

[compboy07]

Here's some new links; these should all be correct:

D-Link Support Page (broken as of this post): http://www.dlink.com/us/en/home-solu...n-access-point
Official FTP Site: ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/
FTP Hotlink: ftp://ftp.dlink.com/Wireless/dap1522...evB_FW_200.zip
Dropbox Mirror: https://www.dropbox.com/s/k9ye195a7n...evB_FW_200.bin

Also, note that you must extract the zip before you upload.

[Joe Ross]

The Bridge Configuration Utility should be updated soon to deal with this firmware version. See team update 1.

[Joe Ross]

Originally Posted by compboy07

I solved this quite easily: just flash f/w 2.00.
- Download here: ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/dap1522_revB_FW_200.bin

You say 2.00, but the link actually goes to 2.03b. Which is correct?

[ElJeffe3255]

Thanks from Team 3255! This really saved us time today! I really feel for the rookie teams who may not realize how vital Chief Delphi is for finding answers fast!

[Team156]

We have run into the configuration error that was earlier mentioned and followed the instructions. We set the modem to 2.4GHz and we made sure it was set to Rev-B. After multiple resets and tries we keep getting an error message that reads: Illegal Firmware v(2.02). We have even tried to downgrade to a different version, but all of the links dont work anymore.
Any help on this matter would be much appreciated.

Thanks, Team156

[Alan Anderson]

Originally Posted by Team156

After multiple resets and tries we keep getting an error message that reads: Illegal Firmware v(2.02).

You could load firmware version 2.03 onto the router and satisfy the configuration tool. Or you could download the newer version of the Bridge Configuration Utility that doesn't complain about 2.02.

[Team156]

We have been unable to find a working link to v2.03. If you have found one that works could you please post it.

Thanks, Team156