LabVIEW Activation Issues

[tanerwoodworth]

I tried looking for a similar post but i didn't see any, so sorry if I missed it.

We installed LabVIEW from the discs that FIRST gave us and we put in the serial and that worked all well and good. But then we downloaded the update from NI's site through the links FIRST had (We downloaded the LabVIEW Update and the Utilities update) Then we reopened LabVIEW and it told us we had 30 days remaining. Then we clicked on Launch LabVIEW and in the upper left corner it has the serial number we used but it says evaluation mode? It gave us the option to "Activate our products" but the button to do that way grayed out. Any Help?

[ProgrammerMatt]

Im having the same issue.

[Mark McLeod]

Go to Start -> All Programs and look under National Instruments for the NI License Manager to activate your products.

The license code you should be using is S14X86763

[tanerwoodworth]

Sorry for the slow reply, thanks mate it worked!

[ProgrammerMatt]

Originally Posted by Mark McLeod

Go to Start -> All Programs and look under National Instruments for the NI License Manager to activate your products.

The license code you should be using is S14X86763

Thanks it worked!