|
|
|
 Place a corner of it on the end of a table, clamp down the other side, and have a good whack at it with a hammer (hard). If it didn't break, it was polycarbonate. - vivek16 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Bag Motor Cad File
Old Question:
"Does anyone have a step file of a Bag Motor? The download link on the vexpro website doesn't seem to be working and was wondering if anyone had already downloaded and still has the step file." Edit: Sorry. Figured out what was happening. When you try to download it is says the link is broken. All you have to do is click on the address bar of the download and delete the quotation at the end. It will then download the model. Address you see: http://content.vexrobotics.com/cad/STEP/217-3351-STEP.zip" Fixed address: http://content.vexrobotics.com/cad/S...-3351-STEP.zip Last edited by Rangel(kf7fdb) : 17-01-2013 at 18:03. Reason: Found Solution 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode