Problem While Debugging Code on the robot (Windriver)

[EyalD]

Hello,
Yesterday we tried to run a commandbased code on our robot, we chose to debug the code and when it ran we clicked "Resume" as usual, but this time
not like any other time, we encountered an error -

After pushing "Yes" another window showed up:


We thought that if we'll close the current project and open another one the problem will disappear.
So, we did create another project and we copy-paste the files and ran the code, that problem happened again.

Just to make sure we tried to run a blank commandbased project and it worked perfectly.

Frustrated as we were, we decided to re-write the project part by part so we could find the source of the problem.

After doing this and waiting for the problem to appear, we found ourselves at the end of the project and the problem disappeared.

We are really curios about that and it'll be great if someone could help us find out what was the source of the problem so we could avoid it in the future.