|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Bumper Height
The rule says the bumpers have to be entirely within the 2 and 10 inch window. Does that mean the bumpers have to be 8 inches or can they be any height as long as its in that 8 inch window?
|
|
#2
|
||||
|
||||
|
Re: Bumper Height
See rule R24.
|
|
#3
|
||||
|
||||
|
Re: Bumper Height
Bumpers are 5" per rule. They have to be totally in the bumper zone. A wise builder would not have the top right at 8" (10" actually thanks Jim) or the bottom right at 2".
Last edited by FrankJ : 25-01-2013 at 19:33. Reason: booboo |
|
#4
|
|||
|
|||
|
Re: Bumper Height
I think you mean 10" for the top.
|
|
#5
|
||||
|
||||
|
Re: Bumper Height
Agreed. I'm the bumper master on our team and depending on how you plan on fastening them to the chassis, they sag. I recommend making a guide out of plywood and running it around the bot to see if the bumpers fit within the zone.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|