|
|
|
 "Well, geez, I can't figure this out. I cut the piece [I]three times[/I] and it's still too short!" - joshsmithers [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| "Well, geez, I can't figure this out. I cut the piece [I]three times[/I] and it's still too short!" - joshsmithers [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Lab View Runtime 2012 Live Camera Feed Issues
Hey guys! After updating our main driver station laptop (2GO PC E12) we've successfully installed the latest 2013 driver station, and all the necessary vi's appear to be present when FRC Driver Station starts up. However, one odd thing that has happened is that we seem to have lost the ability to get a live Axis cam feed. The software that we use runs with camera feed perfectly on LVR 2011 systems that we've updated to the 2013 driver station. We're a little at a loss as to why we seem to be having this problem. Have any other teams encountered problems with LVR 2012?
|
|
#2
30-01-2013, 23:32
|
|||||
|
|||||
|
Re: Lab View Runtime 2012 Live Camera Feed Issues
Our camera works fine, after being configured using the provided utililty. We did have to turn on the live camera feed on the Dashboard by clicking the button under the image window, of course.
|
|
#3
30-01-2013, 23:44
|
|||
|
|||
|
Re: Lab View Runtime 2012 Live Camera Feed Issues
One change this year is that the DS need to connect to the cRIO for the camera to appear in the Dashboard. Could that possibly be the issue you're seeing?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
