|
|
|
 "But from a real life standpoint, that looks like something the evil villains in a superhero movie would use to get around in"
Reading the phrases "real life" and "evil villains in a superhero movie" in the same sentence makes me giggle. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Labview Open/Create/Replace block
Has anyone used the Open/Create/Replace block in labview to write a file to cRIO. If so how did you go about writing a file to the cRIO
|
|
#2
04-02-2013, 10:36
|
|||||
|
|||||
|
Re: Labview Open/Create/Replace block
This should work, but I just wrote it up so I won't be able to test it until later.
Usually it's the file path that messes people up on the cRIO. For the PC you can take the path default, but not for the cRIO. Last edited by Mark McLeod : 04-02-2013 at 10:41.
|
|
#3
04-02-2013, 10:47
|
||||
|
||||
|
Re: Labview Open/Create/Replace block
Thanks we will give that a try. It looks like we were writing to the laptop and not to the cRIO. Do you use this on your teams robot?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
