Inventor 14 VBA Failed to Initialize

[CalTran]

I just downloaded the Inventor Pro 14 student software off their educational site, and when I start up Inventor I'm greeted with the following message:

Originally Posted by Serious Error

VBA failed to initialize properly. Please restart Inventor.

(Specifically I need to close the error 6 times, so I imagine that means it's occurring 6 times.)
Except restarting helps nothing, and neither did installing. Help?

[techhelpbb]

This might help:

http://forums.autodesk.com/t5/Autode...r/td-p/3543758

[jwallace15]

When you say you go to run Inventor, do you mean you go to run the installer, or is it already installed and you go to run the actual program?

I can't remember what the error said, but when I downloaded it I moved the installer .exe file to my desktop from my downloads folder. It wouldn't let me install it because I moved it. I had to redownload it and try it again (moving the installer back to the downloads folder does not work).

[CalTran]

Originally Posted by jwallace15

When you say you go to run Inventor, do you mean you go to run the installer, or is it already installed and you go to run the actual program?

I can't remember what the error said, but when I downloaded it I moved the installer .exe file to my desktop from my downloads folder. It wouldn't let me install it because I moved it. I had to redownload it and try it again (moving the installer back to the downloads folder does not work).

I mean go to run inventor itself. I already installed the program.

*Edit* At the moment I simply downloaded Inventor 13 for use.

[techhelpbb]

Do you have Microsoft Office installed and if so which version?
Have you tried to open the VBA editor in Microsoft Excel or Word?

[Calvin Hartley]

I had some troubles installing Inventor 2014 but I think it was on my end, not theirs. As for running after the install it seems to work fine.

[ekapalka]

I had major problems installing Inventor 2014 (and 2013). It was caused by an improper .NET Framework 4.0. Factory resetting my computer worked like a charm :)

[CalTran]

Originally Posted by techhelpbb

Do you have Microsoft Office installed and if so which version?
Have you tried to open the VBA editor in Microsoft Excel or Word?

I have not tried opening the VBA editor in Excel or Word

Originally Posted by ekapalka

I had major problems installing Inventor 2014 (and 2013). It was caused by an improper .NET Framework 4.0. Factory resetting my computer worked like a charm

I haven't had any issues running the installer. My issue is trying to run Inventor 14 itself.

My setup information:
OS: Windows 8
Processor: Intel Core i7-4770K @ 3.5GHz
System: 64-bit
Graphics: 2 MSI 7950s running CrossFire X
Memory: 16gb (8x2) Ripjaw X series
Autodesk Inventor Pro 2014 installed fine(?) both times, as well as repaired fine(?). I put ? after both fines because there were no prompted errors in these operations.

[techhelpbb]

Originally Posted by CalTran

I have not tried opening the VBA editor in Excel or Word

Bet you will get the same error if you try to open that.

[CalTran]

Originally Posted by techhelpbb

Bet you will get the same error if you try to open that.

And, er, how would I go about trying out this test?

[Michael Hill]

I've had the same issue in the past. It was a new version of Microsoft Office that was the culprit. It seems to want to argue with Inventor. Something about how Office runs VBA in it's own little environment or something like that. Look for VBA7.msi in your Inventor installation media (You may have to download it from Autodesk, but not follow through with installation again, because I think the default behavior after installing Inventor is to delete the installation files). Install that and Inventor should run fine (for now). I've heard opening an Office application will undo your progress and you'll have to reinstall the VBA7.msi every time, but I can't confirm that. Apparently it's a known issue and Autodesk and Microsoft are working together on a solution. In the mean time, the customer loses.

Good luck

[kmusa]

Originally Posted by CalTran

My setup information:
OS: Windows 8
Processor: Intel Core i7-4770K @ 3.5GHz
System: 64-bit
Graphics: 2 MSI 7950s running CrossFire X
Memory: 16gb (8x2) Ripjaw X series

Maybe what you need is a less powerful computer.

[techhelpbb]

Originally Posted by kmusa

Maybe what you need is a less powerful computer.

You know with old games sometimes you need to turn off the 'Turbo' button.

Anyway...
After moving my virtual Windows 7 PC to Apple and resizing it with Fusion then taking it back to my HP laptop....

I installed Office 365 and BOOM!
There's the same error the same number of times.
So I closed Microsoft Office 365's version of Word.
Closed Autodesk Inventor 2014.
Ran Vba7.msi from my link above.
Opened Inventor 2014 and no more BOOM!
Closed Inventor 2014 and restarted Office 365. No problem.
Opened VBA in Office 365's version of Word. No problem.
Restarted Autodesk Inventor 2014. No problem.
Opened Auotdesk Inventor 2014 and Office 365's version of Word at the same time. No problem.

So the fix works for me at least.
Back to the question of whether the affected users are using Office 64bit?