|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Learning Electronics
Quote:
That leads to the mesh-current and node-voltage methods of circuit analysis, which are fundamentals to all circuit design. Highly recommended starting point! |
|
#2
|
|||
|
|||
|
Re: Learning Electronics
Quote:
|
|
#3
|
||||
|
||||
|
Re: Learning Electronics
I'm going to be taking an online course from a friend teaching this:
http://contextualelectronics.com It's kinda pricy, but I think it will be well worth it. |
|
#4
|
||||||
|
||||||
|
Re: Learning Electronics
The ARRL Handbook is really good and should be availible at your library. It had enough theory to get you started, and then lots of projects.
|
|
#7
|
|||
|
|||
|
Re: Learning Electronics
The three textbooks I used for my sophomore level courses at Purdue were Linear Circuit Analysis 2nd Ed (DeCarlo/Lin), Microelectronic Circuit Design 4th Ed (Jaeger/Blalock), Digital Design 4th Ed (Wakerly) (for ECE201, ECE202, ECE255, ECE270).
I wasn't too thrilled with DeCarlo's book, but the subject matter (linear circuit analysis) is very important for a solid foundation in electrical engineering. Jaeger's book is very thorough, and very heavy. It'll have most things you'll want to know about diodes, transistors, CMOS logic, and amplifiers. I really didn't touch Wakerly's book, but that's because the notes and labs for the class were that good ( https://engineering.purdue.edu/ece270/ ). Note that the course website is reused for each semester, so in January the content may be reset. Hope this helps. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|