|
|
|
 It's always nice to have the outside party take a look at your code because one of two things can happen: 1. They write it better. 2. They find your stupid mistake. - [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Banebot Wheel CAD Models
To my surprise, when surfing the google, the banebots website and chiefdelphi, I could not find any reliably accurate models that did not involve registering on some website. I think it would be of great benefit to all FIRST teams looking at possibly buying and using them if members of the community could post some accurate models of these wheels. Specifically, the one I wish I had now is the 3-7/8" wheel with a 1/2" hex mount but I think all models would be helpful. So if you have a moment and the files on your computer, please share them on this thread. Thanks!
Last edited by xForceDee : 20-01-2014 at 18:12. |
|
#2
20-01-2014, 18:34
|
|||||
|
|||||
|
Re: Banebot Wheel CAD Models
There isn't a whole lot to these. The OD and width is given on the Banebots website along with the bore type. You can create your own model if a few seconds. It may not be perfect but will probably be sufficient for what you need it for.
|
|
#3
20-01-2014, 20:13
|
|||
|
|||
|
Re: Banebot Wheel CAD Models
Here is a Banebot wheel posed on 3DContentCentral.com.
http://www.3dcontentcentral.com/down...=171&id=229748 You can download it in 14 file formats. Marie |
|
#4
20-01-2014, 21:22
|
||||
|
||||
|
Re: Banebot Wheel CAD Models
I made this 3-7/8" wheel model for Pioneers in Engineering, so it has a 3/4" bore instead of a 1/2" hex. The folder contains an .ipt from Inventor 2014 and a step file.
https://www.dropbox.com/sh/otp6woq93m2jbvw/zvzs6filzB |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
